Installation, Pf series instruction manual – Apex Digital PF2725 User Manual

Page 12

Advertising
background image

10

PF Series Instruction Manual

INSTALLATION

Please read the safety instructions in this manual completely before installation.
Install your TV in a room where direct sunlight will not fall upon the screen.
Allow enough space (at least 10cm) between the TV and the wall for proper ventilation.
It is recommended to watch TV in soft and indirect light. The optimum watching distance is 5-7 times of the
screen's vertical length.

Auto-degaussing

Color TV is easily affected by magnetism which leads to color distortion. If your TV is moved or affected by near
magnetic components or appliances with power on, turn it off for 1 hour. The built-in auto-degaussing circuit
will eliminate the magnetism interference.

An outdoor antenna or CATV is recommended for the best reception.

75-ohm coaxial cable

300-ohm twin-lead cable

OR

OR

Antenna adapter

(not supplied)

U/V mixer
(not supplied)

Notes:

1 It is recommended that a 75

coaxial cable be used in order to eliminate possible interference and

noise which may occur due to nearby radio transmissions.

2 The antenna cable should not be tied together with other wiring.
3 Set up a lightning arrester and check it regularly when an outdoor antenna is used.

1.Remove the battery compartment lid.
2.Place in two AAA batteries. Make sure the positive + and

negative - polarities are correct.

3.Reattach the battery lid.

Notes:

1 Alkaline batteries are recommended for longer life. Always

replace both batteries with fresh ones of the same type.

2 Do not expose batteries to fire or disassemble them.
3 To avoid battery leakage, remove batteries from the remote

control when it is not to be used for a long period of time
or the batteries are exhausted.

Remote Batteries

VHF
UFH
or Cable

VHF

UHF

To Connect the Antenna

Advertising
This manual is related to the following products: