Apex Digital PF2725 - Manual (Page 15)

13
PF Series Instruction Manual
This section gives descriptions about adjustment of items in the Tuner menu.
1.Auto program
1)Press the / buttons to highlight
“ Auto Program”.
BASIC FUNCTIONS (continued)
Tuning in
Stop Start
Channel
Add/Erase
Antenna
Auto Program 2
Add
A i r
Tuner
2)Press the button, and the TV will search automatically in sequence. After auto search, the TV will store
receivable channels and return to the lowest channel number.
During auto program, press the button to stop searching.
Notes:
1 After auto program, there may be some repeated channels or inferior signal received. In thes case,
press any of the / , Channel Number buttons to select one of the channels. Then set Add/
Erase to Erase so that pressing the CH - / + buttons can not caII up the channeIs. To resume the
channeIs, set Add/Erase to Add in the way mentioned above.
2 When Antenna is set to the Air mode, the TV wiII auto search from channel number 2 to 69; when set to
the Cable mode, it wilI auto search from 1 to 125 (of which 2 -13 channeIs in the Air and CabIe modes
are the same.)
2.Channel selection
Press the / buttons to highlight “ Channel” in the Tuner menu, and press any of the / ,
Channel Number buttons to select channel numbers.
3.Add/Erase selection
Press the / buttons to highlight “ Add / Erase”, and press the / buttons to select “ Add ” or
“ Erase” cyclically.