Samsung SC-D5000-XAC - Manual (Page 51)

Functions
ENGLISH
46 46
✤ The EASY mode allows a beginner to easily make good recordings.
■ The EASY mode only operates in CAMCORDER and CAMERA modes.
1. Set the Power Switch to REC mode.
2. By pressing the EASY button, all functions on the camera will be set to OFF and
the recording settings will be set to the following basic modes:
■ Battery level, recording mode, counter, DATE/TIME, and EIS ( ) will be displayed.
■ The word “EASY.Q” will appear on the LCD at the same time.
However, the DATE/TIME will only be seen if it has been previously set. (See page 44)
3. Press the START/STOP or PHOTO button to start recording.
■ Recording will begin using the basic automatic settings.
4. Press the EASY button again to turn EASY mode off.
■ The EASY function will not turn off when you are recording.
■ The camera will return to the settings that were set prior to activating EASY mode.
Notes
■ In EASY mode, certain functions are not available, such as MENU, FADE, BLC, MF/AF.
-
If you want to use these functions, you must first turn EASY mode off.
■ The EASY mode settings are deleted when the battery pack is uninstalled from the camcorder and
therefore, they must be reset when a battery pack has been replaced.
EASY Mode (for Beginners)
0 : 0 0 : 0 0
1 0 : 0 0 AM
O C T . 1 0 , 2 0 0 3
STBY
EASY
5 5 min
00655B SCD5000 (034~069) 6/11/03 2:19 PM Page 46