Samsung SC-D5000-XAC - Manual (Page 78)

ENGLISH
73 73
Using the CAMCORDER - Advanced Recording
1. Press the PHOTO button half way down and hold it.
■ The still picture appears on the LCD monitor.
■ If you do not wish to record, release the button.
2. Release the PHOTO button and press the PHOTO button again.
■ The still picture is recorded for about 6~7 seconds.
3. After the PHOTO has been recorded, the camcorder returns to STBY mode.
Note
■ To take a quick photo, press the PHOTO button all the way down. The still picture is recorded
for 6-7 seconds.
Searching for a PHOTO Picture
✤ The PHOTO SEARCH works in TAPE PLAY mode.
1. ■ Press the MENU button.
■ The MENU list will appear.
2. Turn the MENU DIAL to highlight CAMCORDER and press the MENU DIAL.
3. Select PLAY SET and press the MENU DIAL to enter the sub-menu.
4. Select PHOTO SEARCH from the sub-menu and press the MENU DIAL.
5. Search for the PHOTO using the (FF) and (REW) buttons.
■ The PHOTO search process appears on the LCD while you are searching.
■ After completing the search, the camcorder displays the still image.
6. To exit, press the (STOP) button.
TAPE PLAY MODE
INITIAL
RECORD SET
PLAY SET CAMCORDER
CAMERA
MEMORY
VIEWER
CAMCORDER SET
RECORD SET
PLAY SET
TAPE PLAY MODE
TAPE PLAY MODE
CAMCORDER SET
PLAY SET
PB DSE SELECT
PHOTO SEARCH
PHOTO COPY
AUDIO SELECT
SOUND1
PHOTO Image Recording
00655B SCD5000 (070~109) 6/11/03 2:20 PM Page 73