Rating control settings, Dynamic compression – Samsung DVD-V1000V-XAA User Manual

Page 17

Advertising
background image

GB

33

GB

32

Rating Control Settings

Rating Control is a password protected system that allows you to
block playback of DVDs based on their content. The system uses an
eight level rating system.
• If you try to play a DVD that exceeds the selected rating, an error

message will appear.

• Not all discs are rated.

1

Open “SETUP MENU”

Press the SETUP button.

2

Select “DVD Setup”

Using the up/down, move the selection arrow to “DVD Setup,” then
push right to select.

3

Select “Rating Control”

Move the selection arrow to “Rating Control,” then push right to
select.

4

Select “Require Password”

Move the selection arrow to “Require Password,” then push right to
select from the following options:

• No - Indicates that no password is required to view any DVD

disc or to change Rating Control options. No additional Rating
Control settings are necessary.

• Yes – Indicates that a password is required to view some DVD

discs and to view Rating Control options. The menu will change
as shown.

NOTES:
• The first time “Require Password” is set to “Yes,” you will be

prompted to enter a new password.

• If the “Enter Password” screen appears, then “Require

Password” has already been set to “Yes.” Please skip to Step 5.

5

Enter Password

Enter a 4-digit password using the 0–9 buttons on the remote
control.
• Write your password down, and keep it in a safe place in case

you need it to change your settings later.

6

Select “Change Rating Level”

Move the selection arrow to “Change Rating Level,” then push right
to select.

7

Change Rating Level

Use the up/down to select one of the following ratings:

• Level 1 (G)

• Level 5

• Level 2

• Level 6 (R)

• Level 3 (PG)

• Level 7 (NC-17)

• Level 4 (PG-13)

• Level 8

All ratings above the level you select will also be blocked, e.g., if
you block Level 6, then Levels 7 and 8 will also be blocked. Press
Enter to confirm your selection.

Dynamic Compression constrains the dynamic range, i.e. the
difference between the quietest and loudest passages of a DVD
soundtrack. This enables you to limit loud noises, such as
explosions, or raise the volume of quiet passages, such as
whispering, while watching a movie. This is convenient for viewing
movies late at night.

1

Open “SETUP MENU”

Press the SETUP button.

2

Select “DVD Setup”

Using the up/down, move the selection arrow to “DVD Setup,” then
push right to select.

3

Select “Language/Audio Setup”

Move the selection arrow to “Language/Audio Setup,” then push
right to select.

4

Set “Dynamic Compression”

Move the selection arrow to “Dynamic Compression,” then push
right to select from the following options:

• On - The total dynamic range of the DVD soundtrack will be

compressed, so quiet passages will be louder and loud
passages will be softer.

• Off – The original dynamic range will be preserved.

Dynamic Compression

01547A DVD-V1000/XAA-Eng2 5/16/02 3:38 PM Page 32

Advertising
This manual is related to the following products: