Samsung EC-I85ZZBBA-AU - Manual (Page 22)

022
Starting the Recording mode Starting the Recording mode
How to use the Program mode How to use the Program mode
Selecting the automatic mode will confi gure the camera with optimal
settings and you can manually confi gure various functions.
1. Select the Program mode by pressing
the M (Mode) button (p.21).
2. Point the camera towards the subject
and compose the image by using the
LCD monitor.
3. Press the Shutter button to capture
an image.
 Refer to page 35-50 for more
information about the Program mode menus.
How to use the ASR mode
This mode will reduce the effect of camera shake and help you get a
well exposed image in dim conditions.
1. Select the ASR mode by pressing the
M (Mode) button. (p.21)
2. Point the camera towards the subject
and compose the image by using the
LCD monitor.
3. Press the Shutter button to capture an
image.
 Things to watch out for using the ASR mode
– The digital zoom will not operate in the ASR mode.
– If the lighting conditions are brighter than fl uorescent lighting conditions,
the ASR will not activate.
– If the lighting conditions are darker than in fl uorescent lighting
conditions, camera shake warning indicator ( ) will be displayed. For
best results only take pictures in situations where the camera shake
warning indicator (
) is not displayed.
– If the subject is moving, the captured image may be blurred.
– Avoid moving the camera while the [Capturing!] message is displayed
to achieve a better result.
– As the ASR uses the camera’s digital signal processor, it may take a
little longer for the camera to process and save the images.
– If the image size is ( ) or ( ),the ASR mode can’t be selected.
01:00 PM
2007 / 08 / 01
01:00 PM
2007 / 08 / 01