Samsung EC-I85ZZBBA-AU - Manual (Page 4)

004
CAUTION Contents
CAUTION indicates a potentially hazardous situation which, if not
avoided, may result in a minor or moderate injury.
 Leaking, overheating, or burst battery could result in fi re or injury.
– Use battery with the correct specifi cation for the camera.
– Do not short circuit, heat or dispose of battery in fi re.
– Do not short circuit, heat or dispose of battery in fi re.
– Do not insert the battery with the polarities reversed.
– Do not insert the battery with the polarities reversed.
 Remove the battery when not planning to use the camera for a long period Remove the battery when not planning to use the camera for a long period Remove the battery when not planning to use the camera for a long period
of time. Battery may leak corrosive electrolyte and permanently damage
of time. Battery may leak corrosive electrolyte and permanently damage of time. Battery may leak corrosive electrolyte and permanently damage
the camera’s components.
the camera’s components.
 Do not fi re the fl ash while it is in contact with hands or objects. Do not Do not fi re the fl ash while it is in contact with hands or objects. Do not Do not fi re the fl ash while it is in contact with hands or objects. Do not
touch the fl ash after using it continuously. It may cause burns.
touch the fl ash after using it continuously. It may cause burns. touch the fl ash after using it continuously. It may cause burns.
 Do not move the camera while it is switched on when you are using the AC Do not move the camera while it is switched on when you are using the AC Do not move the camera while it is switched on when you are using the AC
Charger. After use, always switch off the camera before unplugging the cable
Charger. After use, always switch off the camera before unplugging the cable
from the wall socket. Then make sure that any connector cords or cables to
from the wall socket. Then make sure that any connector cords or cables to from the wall socket. Then make sure that any connector cords or cables to from the wall socket. Then make sure that any connector cords or cables to from the wall socket. Then make sure that any connector cords or cables to from the wall socket. Then make sure that any connector cords or cables to from the wall socket. Then make sure that any connector cords or cables to from the wall socket. Then make sure that any connector cords or cables to
other devices are disconnected before moving the camera. Failure to do so may
other devices are disconnected before moving the camera. Failure to do so may other devices are disconnected before moving the camera. Failure to do so may other devices are disconnected before moving the camera. Failure to do so may other devices are disconnected before moving the camera. Failure to do so may other devices are disconnected before moving the camera. Failure to do so may other devices are disconnected before moving the camera. Failure to do so may other devices are disconnected before moving the camera. Failure to do so may
damage the cords or cables and cause a fi re or electric shock.
 Take care not to touch the lens or lens cover to avoid taking an unclear
image and possibly causing camera malfunction.
 Avoid obstructing the lens or the fl ash when you capture an image.
 When using this camera in low temperatures, the following cases may be
found. These are not camera malfunctions and usually recover at normal
temperature.
– It takes more time to turn on the LCD monitor and the colour may differ
from the subject.
– When changing the composition, there may be an after image on the
LCD monitor.
 Credit cards may be demagnetized if left near case. Avoid leaving
magnetic strip cards near the case.
008 System chart 008 System char 008 System char
008 Package Contents
008 Sold Separately
009 Identifi cation of features
009 Front & Top
010 Back
011 Bottom
011 5 Function button
013 Connecting to a power source
016 Inserting the memory card 016 Inserting the memory car 016 Inserting the memory car
017 Instructions on how to use the
memory card memory car memory car
019 When using the camera for the fi rst
time
020 LCD monitor indicator
021 Starting the Recording mode
021 Selecting modes
021 How to use the Auto mode
022 How to use the Program mode
022 How to use the ASR mode
023 How to use the Movie clip mode
023 Recording the movie clip without sound
023 Pausing while recording a movie clip
(Successive Recording)
024 How to use the Scene modes
READY
RECORDING