Adding a new contact, Storing a number in the phone’s memory – Samsung SGH-T819CNATMB User Manual
Page 52
49
•
FDN Contacts: Fixed Dialling Number mode restricts your outgoing calls and SMS
calls to a limited set of phone numbers. When this feature is enabled, you can
make calls only to phone numbers stored on the SIM FDN list.
•
Print via Bluetooth: sends the selected contact entry information to a Bluetooth
compatible printer.
•
Management
: manages the following:
- Speed dial
- Save new contacts to
- View contacts from
- Own number
- Service number
- Memory status
Adding a New Contact
Use the following procedures to store a new contact to your Phone or SIM Card.
Storing a Number in the Phone’s Memory
The default storage location for saving phone numbers to your phonebook is your
phone’s built-in memory. You can also save your numbers to your SIM card or setup
a default location so that whenever a new phonebook entry is created, you are
prompted to choose between Phone or SIM card. For information on how to change
this setting, see "Default Saving" on page 52. Also, numbers that were stored on
your SIM card can be copied later to your phone’s memory.
1.
When the Idle mode displays, enter the phone number.
2.
Press the Options
soft key.
3.
Scroll to Save to Phonebook by pressing the Up or Down navigation key
then press Select
soft key or the
key.
4.
Select the type (New contact or Existing contact) and press the Select
soft key or the
key.
5.
Enter a name for the this contact in the Name field and press the Save
soft key.