Basic recording – Samsung SC-D353-AFS User Manual
Page 42
42
42
ENGLISH
Basic Recording
✤ The ZERO MEMORY function works in both Camera and Player
modes.
✤ You can mark a point on a tape that you want to return to following
playback.
1. Set the Power switch to CAMERA or PLAYER.
2. Set the Mode switch to TAPE.
3. Press the ZERO MEMORY button on the remote
control before the recording or during playback at
the point where you wish to return.
■
The time code is changed to a tape counter that
is set to ZERO MEMORY with the
0:00:00
(ZERO MEMORY indicator).
■
If you want to cancel the ZERO MEMORY
function, press the ZERO MEMORY button
again.
4. Finding the zero position.
■
When you have finished playback, fast forward or
rewind the tape in stop mode.
The tape stops automatically when it reaches the
zero position.
■
When you have finished recording, set the
Power switch to PLAYER and press the
(REW) button. The tape stops automatically when it reaches
the zero position.
5. The tape counter with the
(ZERO MEMORY indicator)
disappears from the display and the tape counter is changed to the
time code.
[ Notes ]
■
In the following situations, ZERO MEMORY mode may be
canceled automatically:
-
At the end of the section marked with the ZERO MEMORY
function.
-
When the tape is ejected.
-
When you remove the Battery pack or power supply.
■
The ZERO MEMORY may not function correctly where there is a
break between recordings on the tape.
Setting the Zero Memory (SC-D354/D355 only)
✤
Camera(
) Player(
)
ZERO MEMORY(
)
✤
1.
POWER(
)
CAMERA(
)
PLAYER(
)
2.
Mode
TAPE(
)
3.
,
ZERO MEMORY(
)
■
,
0:00:00(
)
■
,
ZERO MEMORY(
)
4.
■
,
,
■
,
PLAYER(
),
(REW)(
)
,
5.
(
)
,
■
,
:
-
-
-
■
,
Zero Memory (
) (
SC-D354/D355)
œ
1