Samsung SC-D353-AFS - Manual (Page 72)

ENGLISH
Playback
72 72
✤ You can connect your Camcorder to a TV through a VCR.
1. Connect the Camcorder to your VCR with
the Audio/Video cable.
■ The yellow jack: Video
■ The white jack: Audio(L) - Mono
■ The red jack: Audio(R)
2. Connect a TV to the VCR.
3. Set the Power switch to PLAYER.
4. Set the Mode switch to TAPE.
(SC-D353/D354/D355 only)
5. Turn on both the TV and VCR.
■ Set the input selector on the VCR to
Line.
■ Select the channel reserved for your VCR on the TV set.
6. Play the tape.
✤ You can play the recorded tape in Player mode.
1. Connect a power source and set the Power switch
to PLAYER.
2. Set the Mode switch to TAPE.
(SC-D353/D354/D355 only)
3. Insert the tape you wish to play back.
4. Using the
/ (REW/FF) buttons, find the first
position you wish to play back.
5. Press the (PLAY/STILL) button.
■ The images you recorded will appear on the TV after a few
seconds.
■ If a tape reaches its end while being played back, the tape will
rewind automatically.
[ Notes ]
■ The playback mode (SP/LP) is selected automatically.
■ If the VCR has an S-Video input terminal, you may use S-Video for
better quality.
■ The S-Video terminal transmits video only. Connect audio cables
for sound.
■ If only a mono audio input is available on the TV set, use the audio
cable with the white jack (Audio L).
Connecting to a TV which has no Audio and Video Input Jacks
Playback
✤ A/V
1. A/V A/V
■ :Video( )
■ :Audio(L)[ ]-
■ :Audio(R)[ ]
2.
3.
PLAYER( )
4. Mode TAPE( )
( SC-D353/D354/D355)
5. .
■ LINE
■
6.
✤ Player( )
1. , PLAYER( )
2. Mode TAPE( )
( SC-D353/D354/D355)
3.
4.
(REW( )) (FF( ))
5. (PLAY/STILL( / ))
■ ,
■ ,
■ SP LP
■ S , S-Video ,
■ S-Video ( ) .
■ , :Audio(L)[ ]
Antenna
S-Video input
Audio/Video
S-Video
TV
VCR
Camcorder
Video input-Yellow
Audio input
(left)-White
Audio input
(right)-Red