Samsung SF-565P-XAA - Manual (Page 135)

F AXING
6.34
Advanced Fax Setting Options
Option Description
Send Forward You can set the machine to always forward all of the
outgoing faxes to a specified destination, in addition to the
fax numbers you entered.
Select Off to turn this feature off.
Select On to turn this feature on. You can set the number
of the remote fax machine to which faxes are forwarded.
RCV Forward You can set your machine to forward incoming faxes to
another fax number during a specified period of time.
When a fax arrives at your machine, it is stored in the
memory. Then, the machine dials the fax number that you
have specified and sends the fax.
Select Off to turn this feature off.
Select On to turn this feature on. You can set the fax
number to which faxes are forwarded. Then, you can enter
the starting time and/or the ending time. The Local Copy
option allows you to set the machine to print the fax, if fax
forwarding is completed without any error.
Toll Save You can set your machine to store your faxes into the
memory and send them at the specified toll-saving time.
For details about Toll Save mode, see page 1.39.
Select Off to turn this feature off.
Select On to turn this feature on. You can set the starting
time and/or the ending time for Toll Save mode.
Junk Fax Setup Using the Junk Fax Barrier feature, the system will not
accept faxes sent from remote stations of which there
machine ID’s are stored in the memory as junk fax
numbers. This feature is useful for blocking any unwanted
faxes.
Select Off to turn the feature off. Anybody can send you a fax.
Select On to turn the feature on. You can set up to 10 fax
numbers as junk fax numbers using the Set option. This
feature recognize the last 6 digits of the fax number set
as a remote fax machine’s ID.
After storing numbers, you do not receive any faxes from
the registered stations. To delete all the junk fax numbers,
use the All Delete option.