Samsung SF-565P-XAA - Manual (Page 151)

U SING Y OUR P RINTER IN L INUX
7.12
The following four tabs display at the top of the window.
• General - allows you to change the paper size, the paper
type and the orientation of the documents, enables the
duplex feature, adds start and end banners and changes
the number of pages per sheet.
• Text - allows you to specify the page margins and set the
text options, such as spacing or colums.
• Graphics - allows you to set image options that are used
when printing images/files, such as color options, image
size or image position.
• Device: allows you to set the print resolution, paper
source and destination.
5
Click OK to apply the changes and close the sf565p
Properties window.
6
Click OK in the Samsung LPR window to start printing.
7 The Printing window appears to allow you to monitor the
status of your print job.
To abort the current job, click Cancel.
Printing Files
You can print many different types of files on the Samsung MFP
device using the standard CUPS way - directly from the
command line interface. The CUPS lpr utility allows you do that.
But the drivers package replaces the standard lpr tool by a much
more user-friendly Samsung LPR program.
To print any document file:
1
Type lpr <file_name> from the Linux shell command line
and press Enter. The Samsung LPR window appears.
When you type only lpr and press Enter, the Select file(s)
to print window appears first. Just select any files you want
to print and click Open.
2
In the Samsung LPR window, select your printer from the
list, and change the printer and print job properties.
For details about the properties window, see page 7.11.
3
Click OK to start printing.