Receiving automatically in ans/fax mode – Samsung SF-565P-XAA User Manual

Page 113

Advertising
background image

F

AXING

6.12

4

Press Start Copy/Fax to receive the fax.

The machine begins receiving a fax and returns to Standby

Mode when the reception is completed.

Receiving Automatically in Ans/Fax
Mode

For using this mode, you must attach an answering machine to

the EXT jack on the back of your machine. See page 1.16.

1

Press Receive Mode.

2

Press and hold Receive Mode until “Ans/Fax” displays on
the bottom line. You may have to repeat this action once or

twice, depending on the mode you’re in.

3

When you receive a call, the answering machine answers.

If the caller leaves a message, the answering machine

stores the message as it would normally. If your machine

hears a fax tone on the line, it automatically starts to

receive the fax.

N

OTES

:

• When you have set your machine to Ans/Fax mode and your

answering machine is switched off or no answering machine is

connected to the EXT jack, your machine automatically goes into

Fax mode after a predefined number of rings.

• If your answering machine has a “user-selectable ring counter,”

set it to answer incoming calls within 1 ring.

• If you are in Tel mode, which is receiving faxes manually, when

the answering machine is connected to your machine, you must

switch off the answering machine, or the outgoing message from

the answering machine will interrupt your phone conversation.

Advertising
This manual is related to the following products: