Samsung SF-565P-XAA - Manual (Page 54)

G ETTING S TARTED
1.39
1
Toll Save Mode
Using the Toll Save button on the control panel, you can quickly
set your machine to send the document(s) stored in the memory
during the preset time slot, when the call charge is lowered. This
Toll Save mode helps you to take advantage of lower long
distance rates at night, for example.
N
OTE
: The toll-saving time slot may vary depending on your
contract with a long distance phone company.
To turn the toll save mode on:
1
Press Toll Save. The button backlight turns on.
2
Press Enter when “Start Time” displays on the bottom line.
3
Enter the time when your machine starts sending toll save
faxes, using the number keypad.
To select “AM” or “PM” for 12-hour format, press the or
button or any number button.
4
Press Enter when the starting time on the display is
correct.
5
Press the scroll button ( W or X ) to display “End Time” and
press Enter.
6
Enter the time when the toll save transmission ends, using
the number keypad.
7
Press Enter to save the setting.
8
To return to Standby Mode, press Stop/Clear.
Once Toll Save mode is activated, your machine stores all of the
documents to be faxed into the memory and sends them at the
programed time.
To turn Toll Save mode off, press Toll Save again. The button
backlight turns off and the mode is deactivated.
N OTE : Once the toll-saving time is set, the Toll Save button
allows you to only enable or disable Toll Save mode. To change the
time setting, use the Toll Save item in the Advanced Fax menu.
See page 6.34.