Samsung HG65NB890XFXZA - Manual (Page 21)

21
English
Connecting the MediaHub HD
Output to any external source connected to MediaHub HD on the hotel desk.
RJP
VARIABLE
AUDIO OUT
AUDIO
OUT
DVI
AUDIO IN
VOL-CTRL
HDMI IN 3
RJP DATA
HDMI IN 1
(ARC) AIR/CABLE
(HDD 5V 1A)
HDMI USB RS/232
VARIABLE
AUDIO OUT A
AUDIO
OUT
DVI
AUDIO IN
VOL-CTRL
HDMI IN 3
RJP RJP DATA DATA
HDMI IN 1 HDMI IN 1
(ARC) AIR/CABLE
(HDD 5V 1A) (
HDMI IN 3
EX-LINK
HDMI IN 1
(ARC)
TV Rear Panel
MediaHub HD Rear
2 HDMI cable
1 RS-232 Data Cable
1. Connect the EX-LINK port of the TV and the RS/232 port of the MediaHub HD.
2. Connect the HDMI IN (1(ARC) , 2(DVI) or 3) port of the TV and the HDMI port of the MediaHub HD.
y MediaHub HD
– The MediaHub HD is a hardware module that has different Audio Video inputs (A/V, Audio, PC, HDMI and USB)
and corresponding outputs. The corresponding output sources connect from MediaHub to the TV. MediaHub
communicates with the TV via RS232. Hot Plug & Play is a function that allows hotel guests to connect an external
source to the MediaHub. MediaHub communicates with the TV by sending messages regarding Active/Inactive sources.
The TV switches to the Active external source.
– You have to connect the HDMI of the MediaHub to the HDMI IN 1(ARC) port of the TV.
– When the TV is on, connect the TV and the RJP within 10 seconds.
y Special features
– PIP
– Auto Detection
[HG890_ZA]Install_Guide-00ENG.indd 21 2013-04-12 5:30:42