Samsung HG65NB890XFXZA User Manual
Page 6
6
English
Using the TV's Controller
✎
The color and shape of the TV Controller may vary depending on the model.
✎
The TV's Controller, a small joy stick like button on the bottom right side of the TV, lets you control the TV without the
remote control.
Power on
Turn the TV on by pressing the Controller when the TV is in standby mode.
Adjusting the volume
Adjust the volume by moving the Controller from side to side when the power is on.
Selecting a channel
Select a channel by moving the Controller backwards and forwards when the power is on.
Using the Function menu
To view and use the Function menu, press and release the Controller when the
power is on. To close the Function menu, press and release the Controller again.
Selecting the MENU (m)
With the Function menu visible, select the MENU (m) by moving the Controller
to the left. The OSD (On Screen Display) Menu appears. Select an option by
moving the Controller to the right. Move the Controller to the right or left, or
backwards and forwards to make additional selections. To change a parameter,
select the it, and then press the Controller.
Selecting the SMART
HUB (™)
With the Function menu visible, select SMART HUB (™) by moving the
Controller upwards. The SMART HUB main screen appears. Select an
application by moving the Controller, and then pressing the Controller.
Selecting a Source (s)
With the Function menu visible, open the Source screen (s) by pushing the Controller
to the right. The Source screen appears. To select a source, move the Controller back
and forth. When the source you want is highlighted, press the Controller.
Power Off (P)
With the Function menu visible, select Power Off (P) by pulling the Controller
forwards, and then press the Controller.
✎
To close the Menu, SMART HUB, or Source, press the Controller for more than 1 second.
Standby mode
Your TV enters Standby mode when you turn it off, and continues to consume a small amount of electric power. To be safe
and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on
vacation, for example). It is best to unplug the power cord.
m
R
P
TV
MIC
STB
SOURCE
VOIC
E
MORE
VOL
CH
LIGH
T
ALARM
MENU
SLEE
P
SMART
HU
B
GUID
E
RETURN
EXIT
HOME
TV Controller
Turn off the TV.
Open Smart Hub.
Open the menu.
Select a source.
The control stick is located at the
lower-left corner on the back of the TV.
Remote control sensor
When you use the Smart Touch Control,
the standby LED does not respond,
except when you press the
P
button.
[HG890_ZA]Install_Guide-00ENG.indd 6
2013-04-12 5:30:37