Samsung EC-SL420SBP-US - Manual (Page 21)

020
Starting the recording mode
How to use the Auto mode ( )
å If the auto focus frame turns to red when you press the shutter
button down half way, it means that the camera cannot focus
on the subject. Should this be the case, the camera is unable to
capture an image clearly.
å Avoid obstructing the lens or the flash when you capture an image.
1. Insert the batteries (p.14). Insert the
batteries taking note of the polarity (+ / -).
2. Insert the memory card (p.14). As this
camera has a 9MB internal memory,
you do not need to insert the memory
card. If the memory card is not in-
serted, an image will be stored in the
internal memory. If the memory card is inserted, an image will
be stored on the memory card.
3. Close the battery chamber cover.
4. Press the power button to turn on the camera.
5. Select the Auto mode by using the mode dial.
6. Point the camera towards the subject and compose the image
by using the LCD monitor.
7. Press the shutter button to capture an image.
Select this mode for quick and easy picture taking with minimal user
interaction.
Selecting modes
You can select the shooting modes by using the mode dial on the upper
of your camera.
Ê How to use the mode dial
Select the shooting mode by turning the mode dial to the selection
point.
Scene mode
Beauty Shot mode
Photo help guide
Movie Clip mode
DUAL IS mode
Smart Auto mode
Auto mode
Program mode
Select point