Samsung EC-SL420SBP-US - Manual (Page 47)

046
Functions ( )
Ê Sharpness
You can adjust the sharpness of the
picture you are about to take.
You cannot check the sharpness effect
on the LCD monitor before you take a
picture, because this function is applied
only when the captured image is stored
on the memory.
Ê Contrast
You can change the contrast of the image.
1. Select [Contrast] by pressing the
Up/Down button.
2. Change the contrast by pressing the
Left/Right button.
3. Press the Shutter button to take an
image.
1. Select [Sharpness] by pressing the Up/Down button.
2. Change the Sharpness by pressing the Left/Right button.
3. Press the Shutter button to take an image.
Ê Saturation
You can change the saturation of the image.
1. Select [Saturation] by pressing the
Up/Down button.
2. Change the saturation by pressing the
Left/Right button.
3. Press the Shutter button to take an
image.
Image Adjust
Back Move
Contrast
Sharpness
Saturation
Adjust contrast, sharpness and saturation.
Image Adjust
Back Move
Contrast
Sharpness
Saturation
Adjust contrast, sharpness and saturation.
Image Adjust
Back Move
Contrast
Sharpness
Saturation
Adjust contrast, sharpness and saturation.
Image Adjust
å When Soft or Vivid in photo style is set, saturation is not avail-
able.
å When Negative in photo style is set, contrast is not available.
OIS (Optical image Stabilization)
This feature allows you to minimize camera
shake while taking a picture.
Minimize camera shake.
OIS
Back Move
å OIS function may not work sufficiently in the following cases.
- To take pictures of a moving subject.
- To take pictures with higher digital zoom values.
- When camera shake is beyond the camera-shake correction range.
- When the shutter speed is slow.
- When the battery is low.
å If you operate OIS function using a tripod, the image can be
blurred by the vibration of the sensor of the OIS. Turn off the
OIS function when you use a tripod.
● If the camera is subjected to an impact, the LCD monitor
can be affected. To make the camera function properly
again, turn it on and off.