Samsung SGH-I467ZWAATT User Manual

Page 123

Advertising
background image

Note: The process of the initial TV activation can take up to 10

seconds. Please do not press the button again.

8. If the TV turned on, tap Yes.

– or –

If the TV did not turn on after tapping

(Power)

and waiting 10 seconds, tap No or Retry.

9. From the Choose Your TV Tuner screen, select the entry

that corresponds to your current channel control

method:

• Cable/Satellite/STB/PVR/DVR: selected when changing

channels is done via a receiver box. Channels are not changed

via the TV remote but rather through the receiver/box.

• My xxx TV: selected when a signal is fed directly into the TV

and no box is used. Channels are changed directly on the TV by

using the TV remote and not a box’s remote.

Note: Try matching your current channel selection method.

10. Select the Satellite Box Brand from the available list.

For example, DirectTV

®

.

If your brand does not appear in the list, tap Other Satellite

Box Brands and follow the on-screen instructions.

Important! You must configure your set top box for IR

communication with your device. If you do not
select More Info.. below and follow the on-screen
instructions you may not be able to properly use
the application.

11. When prompted to Enable IR, tap More Info.. to learn

how to configure your set top box to receive and

respond to IR controls.

12. Only after completing the IR setup process and

programming your box, press

Back.

Note: This IR programming of your set top box is a one-time

process and once successful should not need to be
repeated.

13. If prompted to either personalize your experience or

configure Netflix

®

, follow the on-screen instructions.

116

Advertising