Samsung SGH-I467ZWAATT - Manual (Page 128)

Add Wi-Fi Network
To open a dialog where you can add a Wi-Fi network by
entering its Network SSID (the name it broadcasts), security
type, and other properties:
1. From a Home screen, touch Settings ➔
Wi-Fi, and then touch Add Wi-Fi network.
2. Use the keyboard to enter Network SSID.
3. Touch the Security field and then touch a security type.
Note: Depending on the Security protocol used by the WAP,
additional network information may be required, such as
a Password.
4. If necessary, touch Password and enter the password or
hex key.
5. Touch Save.
Advanced Settings
Set up and manage wireless access points.
1. From a Home screen, touch Settings ➔
Wi-Fi.
2. Touch Menu ➔ Advanced.
The following options display:
• Network notification: Have your device alert you to new
Wireless Access Points (WAPs). Touch Network notification to
turn notifications On or Off. When enabled, a check mark
appears in the check box.
• Keep Wi-Fi on during sleep: Specify when to disconnect from
Wi-Fi. Option are: Always, Only when plugged in, or Never.
• Check for Internet service: Checks if Wi-Fi internet service is
available when connected to an AP (Access Point).
• MAC address: View your device’s MAC address, required
when connecting to some secured networks (not configurable).
• IP address: View your device’s IP address.
Wi-Fi Direct Settings
You can configure your device to connect directly with other
Wi-Fi capable devices. This is an easy way to transfer data
between devices. These devices must be enabled for Wi-Fi
Direct communication. This connection is direct and not via a
hot spot or WAP.
Note: Activating this feature will disconnect your current Wi-Fi
network connection.
Settings 121