Samsung CLX-9250ND-XAA - Manual (Page 77)

SyncThru™ Web Service_ 77
at the same time, you can set the job processing order.
- Priority: Set the priority by numbering the job between 1-16
using the up/down arrows. Higher number has a priority.
- First In, First Out: The machine proceeds with the jobs in the
requested order.
• Supplies Management: Allows you to set options for supplies
reorder notification.
Low Alert Level: Select the remaining percentage for which
you want to receive notification. For example, if you set this
value to 10% for imaging unit, and the average imaging unit
yield is 20,000 pages, when about 2,000 pages (10% of 20,000
pages) are left, a notification will be sent.
• Power Button Operation (SCX- 8230 8240 Series only): Allows
you to select the modes for turning the power off. When you turn the
machine’s power off using the Power button, there are three modes
you can choose to put the machine into: Sleep, Hibernate, or Shut
down. The mode you choose here will be applied to the machine
when the user presses the Power button to turn the power off.
- Sleep: The system revival time is shorter, but the amount of
saved electricity is less.
- Hibernate: The electricity is completely cut-off. However, it will
take more time to revive the system than the Sleep mode.
- Shut down: The electricity and the system is completely shut
down. It will take a few minutes to revive the system.
Eco
You can enable the Eco mode and change the custom eco settings. Set
the values and click the Apply button on the upper right corner of the
page. This feature is also available from the machine (see "Eco Settings
(administrator only)" on page 31).
Turning the Eco mode
1. From the SyncThru™ Web Service, select the Settings tab >
Machine Settings > System > Eco > Setting.
2. On the main pane, select one of the options; On, Off, and
On-Forced for Eco Mode (Device Default).
• Off: Select to turn the Eco mode off.
• On: Select to turn the Eco mode on.
• On-Forced: Select to turn the Eco mode on with password. If a
user wants to turn the Eco mode on/off, the user needs to enter
the password you set here.
If you selected On or On-Forced, check the setting you want
to use; Factory Default or Custom Settings
3. Click Apply.
Changing the Custom Settings
1. From the SyncThru™ Web Service, select the Settings tab >
Machine Settings > System > Eco > Setting.
2. From the Eco Features Configuration, check Custom Settings.
You cannot change the settings for Factory Default option.
3. Click Edit & Preview Simulator.
4. Check the current settings from the Edit & Preview Simulator
window and change the settings.
5. Click on Apply.
When you apply the changes, you can preview the result of reduced
emission of carbon dioxide, used electricity, and the amount of
saved paper in accordance with the settings you selected. The
results are calculated on the basis that the total number of printed
pages is one hundred without a blank page when the eco mode is
disabled.
• Referred to the calculation coefficient for CO2, energy, and paper
from IEA, the index of Ministry of Internal Affairs and
Communication of Japan, and www.remanufacturing.org.uk.
Each model has a different index.
• The power consumption in printing mode refers to the average
printing power consumption in this machine.
• The actual saved or reduced amount may differ depending on the
operating system used, computing performance, application
software, connection method, media type, media size, job
complexity, and etc.
The Undo button clears all the values set so far.
Input Trays
You can set paper size, type for each tray and other tray related
settings. Set the values and click the Apply button on the upper right
corner of the page. This feature is also available from the machine (see
"Tray settings" on page 30).
• Paper Size: Select the paper size to use for each tray.
• Paper Type: Select the paper type to use for each tray.
• Tray Confirmation Message: Select to activate a tray confirmation
message which asks whether or not to set the paper size and type
for the just opened tray.
• Tray Settings
- Auto Tray Switch: Check the box to set this option to on. If this
option is on, the machine automatically switches to the tray with
paper. For example, if Tray1 is empty, the machine automatically
prints using the paper in the Tray 2 and so on.
- Auto Continue: Check the box to set this option to on. If this
option is on, the machine continues printing on a larger available
paper when the tray is empty or there is a mismatch between the
machine driver and the paper in the tray.
- Paper Substitution: You can set the machine to substitute
paper when the paper requested paper for a print job is not
available. For example, if the requested ledger sized paper is not
available in the tray, this machine substitutes A3 for the
requested paper.
- Tray Priority: You can set the priority among trays. Paper in the
tray with the highest priority will be used first. Select the tray to be
used first from the drop-down list.
Sound/Volume
You can set the volume for button sounds, notice alarms, and the sound
that occurs during a fax job. Select the volume for each sound from the
drop-down list. If you want to mute the sound, check the checkbox. Click
on the Apply button in the upper right corner of the page.This feature is
also available from the machine (see "Sound" on page 15).
Select the volume from the drop-down list and check Mute, if you want
to mute the sound.
• Button & Notice Sound: You can set the sound volume for when