Tcp/ipv6, Ethernet – Samsung CLX-9250ND-XAA User Manual
Page 54
Network setup_ 54
address will show on the Home screen.
TCP/IPv6
You can set the IPv6 settings. Configure the settings and click OK to save
the settings.
Press Machine Setup > Network Settings > TCP/IP > TCP/IPv6 from the
display screen.
You can also use this feature from the SyncThru™ Web Service.
Open the Web browser from your networked computer and type the IP
address of your machine. When SyncThru™ Web Service opens, click
Settings > Network Settings > TCP/IPv6 (see "TCP/IPv6" on
•
Protocol: Check to enable IPv6 protocol in the system. Reboot the
machine to apply the change.
•
IPv6 Addresses: Shows the IPv6 address types.
-
Link-local Address: This is an IPv6 address starting with a prefix
value FE80. This address has local link scope and is automatically
generated.
-
Stateless Address: This is an IPv6 address which is formed by
router advertised prefix and interface identifier. On a interface like
Ethernet, interface identifier is usually derived from the Mac address
of the machine. The advertised prefix depends on the router
configurations.
More than one address may be configured for the router
advertisement, but only one will be displayed in the display
screen.
-
Stateful Address: This is an IPv6 address which is acquired by a
DHCPv6 server.
-
Manual Address: This is an IPv6 address which an administrator
can configure manually.
•
Default Gateway: This is an IPv6 address of default gateway. Machine
automatically detects IPv6 gateways. \
•
DHCPv6 Configuration: Select the DHCPv6 configuration you want to
us.
-
Use DHCP as directed by a router: DHCPv6 is enabled when a
router advertises to use DHCPv6.
-
Always Enable DHCP: Regardless of router advertisement, use
DHCPv6 to acquire an IPv6 address.
-
Never use DHCP: Disables DHCPv6.
•
IPv6 Manual Address: Check to enable. You can enter the IPv6
address manually. \
•
IPv6 Host Name: Shows the machine's host name which can be set in
TCPIP > DNS Configuration menu (see "DNS Configuration" on
•
IPv6 Domain Name: Enter the domain name. You can enter up to 128
characters.
•
Primary DNSv6 Server Address: Enter the address of the DNSv6
server you want to use primarily.
•
Secondary DNSv6 Server Address: Enter the address of the DNSv6
server you want to use as an alternative.
•
Dynamic DNSv6 Registration: Check to enable or disable dynamic
DNSv6 registration.
•
Authentication Method: Select the authentication method for Dynamic
DNS Update. To activate this setting, Dynamic DNS Registration
should be enabled.
Ethernet
You can set ethernet settings. Configure the settings and press OK to save
the settings.
Press Machine Setup > Network Settings > TCP/IP > Ethernet from the
display screen.
You can also use this feature from the SyncThru™ Web Service.
Open the Web browser from your networked computer and type the IP
address of your machine. When SyncThru™ Web Service opens, click
Settings > Network Settings > General (see "General" on page 82).
•
MAC Address: Shows the Mac address of the machine.
•
Speed Rate: Choose the speed rate of ethernet.
•
Current Speed Rate: Shows current ethernet speed rate.