Samsung CLX-9250ND-XAA - Manual (Page 59)

Network setup_ 59
append root to base DN.
• Login Name: You can enter up to 64 characters.
• Password: You can enter up to 64 characters.
• Search Name Order: Select the order you want. When LDAP
address book search is performed it is required to map the user
entered text to an LDAP attribute. The result will be shown as
how you set this. If you set it to Common Name, the result will be
listed in alphabetical order according to the Common Name.
• LDAP Configuration Test: Press to test the LDAP server.
2. Press OK to save the change or Back (Cancel) to return to the
previous screen.
Editing a LDAP server
1. From the list, select the LDAP server you want to edit and press
Edit.
2. A pop-up window appears.
Edit the necessary information
3. Press OK to save the change or Back (Cancel) to return to the
previous screen.
Deleting a LDAP server
1. From list select the LDAP server you want to delete and press
Delete.
2. A confirmation window appears. Press OK.
3. Press OK to save the change or Back (Cancel) to return to the
previous screen.
SMB Auth Settings
You can set SMB authentication. Configure the settings and press OK to
save the settings.
Press Machine Setup > Network Settings > SMB Auth Settings from the
display screen.
You can also use this feature from the SyncThru™ Web Service.
Open the Web browser from your networked computer and type the IP
address of your machine. When SyncThru™ Web Service opens, click
Security > Network Security > External Authentication Server >
SMB Server (see "SMB Server" on page 88).
Adding a SMB sever
1. Press Add to add a new SMB server.
• Default Domain Name: Enter the domain name to be used for
log-in. You can enter up to 128 characters.
You can only use ASCII 32 - 35, 37 - 63, 65 - 123, or 125
character sets.
• Default Server: Enter the default server from 1 to 65535.
• Default Port No.: Enter the default port number from 1 to
65535. 139 is set as a default value.
• Standard port number for SMB over NetBIOS is 139.
• Standard port number SMB over TCPIP direct is 445.
• Backup Server: Enter the backup server from 1 to 65535.
• Backup Port No.: Enter the backup port number from 1 to
65535. 139 is set as a default value.
• Default Server: Press to make it a default server.
2. Press OK to save the change or Back (Cancel) to return to the
previous screen.
Editing a SMB server
1. From list select the SMB server you want to edit and press Edit.
2. A pop-up window appears.
Edit the necessary information
3. Press OK to save the change or Back (Cancel) to return to the
previous screen.
Deleting a SMB server
1. From the list, select the SMB server you want to delete and press
Delete.
2. A confirmation window appears. Press OK.
3. Press OK to save the change or Back (Cancel) to return to the
previous screen.
Network filtering settings
You can set your machine to prevent unlisted IP or MAC addresses from
connecting to the machine.
Network Filtering Settings
You can set general network filtering settings. Configure the settings and
press OK to save the settings.
Press Machine Setup > Network Settings > Network Filtering Settings
from the display screen.
You can also use this feature from the SyncThru™ Web Service.
Open the Web browser from your networked computer and type the IP
address of your machine. When SyncThru™ Web Service opens, click
Security > Network Security > IP/MAC Filtering (see "IP/MAC
Filtering" on page 87).