Samsung CLX-9250ND-XAA - Manual (Page 64)

Network setup_ 64
Network Test
You can test whether or not the IPv4 address is valid and if it’s connected to
the network.
1. Press Machine Setup > Network Settings > Network Test from the
display screen.
2. Enter the IPv4 address you want to test and press Test.
The screen comes up with the test result.
Only IPv4 address format is usable.
Network security setting
IPSec Settings
You can set IP security settings. Configure the settings and press OK to
save the settings.
Press Machine Setup > Security > IPSec Settings from the display
screen.
You can also use this feature from the SyncThru™ Web Service.
Open the Web browser from your networked computer and type the IP
address of your machine. When SyncThru™ Web Service opens, click
Security > Network Security > IP Security (see "IP Security" on
page 87).
• Current Status: Shows the current status of IP security functionality.
• IPSec: Select to enable IP security.
• Shared Secret: Enter a new Pre-Shared Key for IP security
communication.
To activate this setting, IPSec and Change Shared Secret
should be selected.
• Confirm Shared Secret: Confirm the Pre-Shared Key for IP security
communication.
• Change Shared Secret: Select to change the Shared Secret.
• Clear Connection: Clear all previous IP security connections with
client.