Viewing the picture-in-picture, Selecting an external signal, Selecting the pip screen – Samsung HPM5027X-XAA User Manual
Page 14
Viewing the Picture-in-Picture
27
Selecting an External Signal
You can use PIP to view a signal from an external source, such as a VCR.
1
Press the Menu button. Move the joystick up or
down to select the “PIP”, then press the joystick to
enter.
2
Move the joystick up or down to select the
“Source”, then move the joystick left or right to
enter.
3
Move the joystick up or down to select an external
signal, then move the joystick left or right.
The signal from these inputs will not appear if you
have not connected any equipment to the PDP’s
input jacks.
4
Press the Menu button to exit.
PIP
Select
On
Locate
Source
Move Adjust Exit
PIP
Select
On
Locate
Source
Move Adjust Exit
PIP
VIDEO
S-VIDEO
COMPONENT 1
Move Exit
26
Selecting the PIP Screen
1
Press the Menu button. Move the joystick up or down to
select the “PIP”, then press the joystick to enter.
2
Move the joystick left or right to select the “On”.
The PIP image will appear in the corner of the screen.
3
Press the Menu button to exit.
Note
• The PIP function operates in only PC mode or Component2 mode.
PIP
Select Off
Move Enter Exit
PIP
Select
On
Locate
Source
Move Adjust Exit
Quick way to access the PIP: Just press “PIP”
on the remote control.
!
Quick way to access the PIP source: Just press
“Source” in the cover on the remote control.
!