Samsung HPM5027X-XAA - Manual (Page 28)

55 54
Preset:
• Press the RGB button to select the PC mode.
1 Press the Menu button. Move the joystick up or
down to select the SETUP, then press the joystick to
enter.
2 Move the joystick up or down to select the “Miscel-
laneous”, then move the joystick left or right to
enter.
3 Move the joystick up or down to select the “Informa-
tion”, then move the joystick left or right to enter.
4 Press the Menu button to exit.
Information Power Saver (PC mode only)
Position
Language English
Scaling Wide
Zoom/Panning
Image Lock
Miscellaneous
Move Adjust Exit
Position
Language English
Scaling Wide
Zoom/Panning
Image Lock
Miscellaneous
Move Adjust Exit
Information
Multi Control
Key Lock Off
Move Adjust Exit
Resolution
Frequency
Horizontal Vertical
1024 768
48.3KHz 60Hz
Exit
This monitor has a built-in power management system called Power Saver. This power management
system saves energy by switching your monitor into a low-power mode when it has not been used for a
certain amount of time. This power management system operates with a VESA DPMS compliant video
card installed in your computer. You use a software utility installed on your computer to set up this fea-
ture. See the table below for details.
Table 1. Power-saving modes
Notes:
• This monitor automatically returns to normal operation when horizontal and vertical sync return.
• This occurs when moving the computer’s mouse or pressing a key on the keyboard.
• For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattend-
ed for long periods.
State
Normal
Operation
Power-saving Function Mode
Inactive
Active
Blanked
Amber Blinking
(1 sec Interval)
Active
Inactive
Blanked
Amber Blinking
(1 sec Interval)
Inactive
Inactive
Blanked
Amber Blinking
(1 sec Interval)
Horizontal Sync
Vertical Sync
Video
Power
Indicator
Active
Active
Active
Green
Standby Mode
Suspend Mode
Position A1
Power-off Mode
Position A2