Samsung HPM5027X-XAA - Manual (Page 30)

Selecting a Menu Language
59 58
Setting the Multi Control
1 Press the Menu button. Move the joystick up or
down to select the “SETUP”, then press the joystick
to enter.
2 Move the joystick left or right to select the appropri-
ate language: English, Spanish, or French.
3 Press the Menu button to exit.
SETUP
Move Adjust Exit
Language English
Multi Control
Key Lock Off
1 Press the Menu button. Move the joystick up or
down to select the “SETUP”, then press the joystick
to enter.
2 Move the joystick up or down to select the “Multi
Control”, then move the joystick left or right to enter.
3 Enter ID setup number. The ID Setup operates by
using only the joystick or channel up/down buttons.
4 Move the joystick up or down to select the “ID
Input”, The ID Input operates by using only the
numeric buttons.
5 Enter ID Input and the screen with the set ID number
will be switched to the Menu screen.
Note
• To operate the multi control function, PDP1 and PDP2 should be set in the ID Setup mode. When
entering the ID Input number of PDP1 while the PDP is set in the ID Input mode, only PDP1 is
switched to the Menu screen and you can operate the remocon. At this time, PDP2 doesn't operate
with the remocon and displays the standby mode of ID Input. (See the figure of step 4.)
SETUP
Move Adjust Exit
Language English
Multi Control
Key Lock Off
SETUP
Move Adjust Exit
Language English
Multi Control
Key Lock Off
SETUP
Move Adjust Exit
ID Setup 0 1
ID Input _ _
SETUP
Move Adjust Exit
ID Setup 0 1
ID Input 0 1