Samsung SPH-L900ZWASPR - Manual (Page 157)

 Automatic answering: When enabled, and you have a headset connected to the
Headset Jack, incoming calls are answered automatically after a delay, which you
can set at Automatic answering timer. Tap to enable or disable the setting.
 Automatic answering timer: Choose a time period to delay before automatically
answering an incoming call when Automatic answering is enabled and a headset is
connected to the device. Tap to choose 2 seconds, 5 seconds, or 10 seconds.
 Outgoing call conditions: When the device is paired with a Bluetooth headset, you
can choose to make calls even when the device is locked. Tap to choose Even
when device locked, or Only when device unlocked.
Ringtones and Keypad Tones
Choose tones and vibrations to play for incoming calls and keypad taps.
1. Press and then tap > Settings > My Device.
2. Tap Call, and then tap Ringtones and keypad tones.
3. Configure settings:
 Tap Ringtones, and then select a ringtone for incoming calls. Tap OK to save your
selection.
 Tap Vibrations, and then select a vibration pattern to play for incoming calls when
the Vibrate when ringing option is enabled. You can tap Create to create a custom
pattern. Tap OK to save the settings.
 Tap Vibrate when ringing to play a vibration for incoming calls. The vibration
pattern is set at the Vibrations setting.
 Tap the check box next to Dialing keypad tone to enable or disable tones for
keypad taps.
Personalize Call Sound
Choose options for call audio, in cases where you might need the sound softer or more clear, or
optimized for your right or left ear.
1. Press and then tap > Settings > My Device.
2. Tap Call, and then tap Personalize call sound.
3. Tap a setting, and then configure options if available:
 Adapt sound: Tap Start, and then follow the onscreen prompts to find the best
sound for you.
 Soft sound: Use softer sounds during calls.
Settings 145