Samsung SPH-L900ZWASPR - Manual (Page 161)

 Schedule: When enabled, your phone reads out event information when a reminder
sounds.
Power Saving Mode Settings
Configure Power saving mode settings to conserve battery power.
1. Press and then tap > Settings > My Device.
2. Tap Power saving mode to configure options:
 Tap the ON/OFF switch next to Power saving mode to turn the mode On or Off.
Power saving mode must be turned On to configure settings.
 CPU power saving: When enabled, the maximum performance of the device’s CPU
(Central Processing Unit) is disabled to conserve battery power. Tap the check box
beside the option to enable or disable it.
 Screen power saving: When enabled, the frame refresh rate and brightness level
are reduced to conserve power. Tap the check box beside the option to enable or
disable it.
 Turn off haptic feedback: When enabled, Haptic feedback is disabled to conserve
battery power. Tap the check box beside the option to enable or disable it.
Note: Tap Learn about Power saving mode to view information about these settings.
Accessory Settings
Configure your device’s behavior when it is connected to an optional dock (not included).
1. Press and then tap > Settings > My Device.
2. Tap Accessory to configure settings:
 Dock sound: When enabled, a sound plays when you insert and remove the device
from the dock.
 Audio output mode: When enabled, audio plays through the dock speakers when
the device is docked.
 Desk home screen display: When enabled, displays a special screen when the
device is docked.
 Audio output: Choose a destination for audio output when you connect to devices
via HDMI cable.
Settings 149