Samsung SPH-L900ZWASPR - Manual (Page 141)

while roaming, so you may want to control your phone’s roaming behavior with Roaming
settings.
1. Press and then tap > Settings > Connections.
2. Tap More networks > Roaming.
3. Configure options:
 Roaming network: Select a roaming default, from Home only, to only connect to the
Sprint network, or Automatic, to allow connections to Sprint’s partner networks, if
available.
 Roaming settings: Choose options for roaming, including Voice and data for
Domestic CDMA and International CDMA networks, and Data for GSM networks (if
available).
 Roaming guard: Enable or disable roaming access for Voice and Data for Domestic
CDMA, Voice, Data and Outgoing text messages for International CDMA networks,
and Voice, Data and Outgoing text messages for GSM networks (if available).
NFC Settings
Use NFC (Near Field Communication) to share information between your device and another
NFC device by touching the devices together, typically back-to-back.
NFC is used with S Beam and Android Beam, and must be turned On to use these features.
Turn NFC On or Off
Use NFC (Near Field Communication) to share information between your device and another
NFC device or NFC tag, by touching the devices together, typically back-to-back.
1. Press and then tap > Settings > Connections.
2. Tap the ON/OFF switch beside NFC to turn NFC On or Off.
Android Beam
With Android beam, you can transmit app content via NFC to other NFC devices that support
Android Beam.
Android Beam uses NFC, so NFC must be turned On before you can turn on Android Beam.
1. Press and then tap > Settings > Connections.
2. Tap the ON/OFF switch beside NFC to turn NFC On. NFC must be on to use Android
Beam.
Settings 129