Samsung HPS6373X-XAA - Manual (Page 60)

English-60
1. The wall mount bracket is delivered separately. Please
tighten the captive screw in the direction of the arrow
after assembling the bracket. Install the Wall Mount
Bracket after the screws are securely inserted into the
wall.
2. Assemble the Support as shown in the
following figure and fasten it with the
screws after attaching it to the wall.
(The number of supplied screws
is
18. For your safety, fasten all 18
screws).
3. After fastening the screws, check if the
support is properly installed as shown in
the figure below.
How to assemble the Wall Mount Bracket
Please use only the parts and components provided for wall mount installation.
Wall Installation Instructions
Refer to the installation guide supplied with your wall bracket.
1. Contact a professional installation service to install the wall bracket.
2. Samsung Electronics is not responsible for any damages to the product or harm to customers or others when the installation is done by the
customer.
3. This product is for installing on cement walls. The product may not stay in place when installed on plaster or wood.
4. Connect all external devices prior to installing the wall bracket.
5. The package contents and parts supplied for the wall mount are subject to change without prior notice.
Installation Notes
Parts (Wall attachment panel is sold separately. Check with your dealer.)
Screw : 6 Screw : 18 Plastic Hanger : 6
Left : 1 Right : 1 1 3
Wall Mount Bracket ASSY-HINGE Support Accessories
Captive Screws
Wall Mount Bracket
Wall Mount Bracket
ASSY-HINGE
(RIGHT)
ASSY-HINGE
(RIGHT)
ASSY-HINGE
(RIGHT)
Support
Separate ASSY-HINGE
into Left and Right.
ASSY-HINGE
(LEFT)
ASSY-HINGE
(LEFT)
ASSY-HINGE
(LEFT)
The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and the screw are the same)
1. Remove the 6 screws on the back of the product.
Fixing the TV panel to the wall attachment panel bracket
2. Insert the screw into the plastic hanger. (See the figure below)
• Please ask the installers to install the wall mount bracket.
• Please be sure to check if the plastic hanger is completely secured on both
the left and right side after hanging the SET on the wall mount bracket.
• Please avoid catching your fingers while installing and adjusting the angle.
• Please tightly secure the wall mount bracket to the wall to avoid injury from a
falling TV.
Continued...
BN68-00991Q-01Eng 8/8/06 4:46 PM Page 60