Samsung SMH1816W-XAA - Manual (Page 4)

4_ safety information
GROuNdING INsTRucTIONs
T
his appliance must be grounded. In the event of an
electrical short circuit, grounding reduces the risk of
electric shock by providing an escape wire for the
electrical current. This appliance is equipped with a cord
that includes a grounding wire and a grounding plug.
The plug must be plugged into an outlet that is properly
installed and grounded.
WARNING
WARNING
Improper use of the grounding plug can result in a risk of
electric shock.
• Plug into a grounded 3 prong outlet. Do not remove
the third (grounding) prong. Do not use an adaptor or
otherwise defeat the grounding plug.
• Consult a qualified electrician or service person if you
do not understand the grounding instructions or if you
are not sure if the appliance is properly grounded.
• We do not recommend using an extension cord with
this appliance. If the power-supply cord is too short,
have a qualified electrician or serviceman install an
outlet near the appliance. However, if it is necessary
to use an extension cord, read and follow the “Use of
Extension Cords” section below.
use of extension cords
A short power-supply cord is provided to reduce the risk
of your becoming entangled in or tripping over a longer
cord. Longer cord sets or extension cords are available
and you can use them if you exercise care. If you use a
long cord or extension cord:
1. The marked electrical rating of the cord set or
extension cord should be at least as great as the
electrical rating of the appliance.
2. The extension cord must be a grounding-type 3-wire
cord and it must be plugged into a 3-slot outlet.
3. The longer cord should be arranged so that it will not
drape over the counter top or tabletop where it can
be pulled on by children or tripped over accidentally.
If you use an extension cord, the interior light may
flicker and the speed of the blower may vary when the
microwave oven is on. Cooking times may be longer
too.
WARNING
CRITICAL
INSTALLATION
WARNINGS
The installation of this appliance must be performed
by a qualified technician or service company.
• Failing to have a qualified technician install
the oven may result in electric shock, fire, an
explosion, problems with the product, or injury.
Unpack the oven, remove all packaging material and
examine the oven for any damage such as dents
on the interior or exterior of the oven, broken door
latches, cracks in the door, or a door that is not lined
up correctly. If there is any damage, do not operate
the oven and notify your dealer immediately.
Make sure to install your oven in a location with
adequate space.
Remove all foreign substances such as dust or water
from the power plug terminals and contact points
using a dry cloth on a regular basis.
• Unplug the power plug and clean it with a dry
cloth.
• Failing to do so may result in electric shock or fire.
Plug the power cord into a properly grounded
3 pronged outlet. Your oven should be the only
appliance connected to this circuit.
• Sharing a wall socket with other appliances, using
a power strip, or extending the power cord may
result in electric shock or fire.
• Do not use an electric transformer. It may result in
electric shock or fire.
• Ensure that the voltage, frequency and current
provided match the product’s specifications.
Failing to do so may result in electric shock or fire.
Keep all packaging materials out of the reach of
children. Children may use them for play.
This appliance must be properly grounded. Read
and follow the specific “Grounding instructions”
found in the beginning of this Section. Do not ground
the appliance to a gas pipe, plastic water pipe, or
telephone line.
• This may result in electric shock, fire, an
explosion, or problems with the product
• Never plug the power cord into a socket that is
not grounded correctly and make sure that it is in
accordance with local and national codes.
Do not cut or remove the third (ground) prong from
the power cord under any circumstances.
Connect the oven to a 20A circuit. If you connect the
oven to a 15A circuit, make sure that circuit breaker
is operable.
Do not install this appliance in a humid, oily, or dusty
location, or in a location exposed to direct sunlight or
water (rain drops).
• This may result in electric shock or fire.
Plug the power plug into the wall socket firmly. Do
not use a damaged power plug, damaged power
cord, or loose wall socket.
• This may result in electric shock or fire.
Do not mount over a sink.
Do not pull or excessively bend the power cord.
Do not twist or tie the power cord.
Do not hook the power cord over a metal object,
place a heavy object on the power cord, insert the
power cord between objects, or push the power
cord into the space behind the appliance.
• This may result in electric shock or fire.
Do not pull the power cord when you unplug the
oven.
• Unplug the oven by pulling the plug only.
• Failing to do so may result in electric shock or fire.
sAVe These INsTRucTIONs
SMH1816_XAA_DE68-03942A_EN.indd 4 11/01/2014 9:47:35