Connecting the power, Connecting to video equipment – Samsung SPA800BX-XAA User Manual
Page 22
Advertising
to “Video” mode using the [VIDEO] buttons or check whether your PC is connected correctly.
When connecting the projector to PC, check that PC setup complies to display settings supported by this projector.
If not, there may be signal problems.
|
Basic Settings
|
Connecting the Power
|
Connecting to video equipment
|
1. Rear of Projector
Plug the power cord into the power terminal on the rear side of the projector.
|
Basic Settings
|
Connecting the Power
|
Connecting to video equipment
|
Connecting to VCR/Camcorder/Cable Box
Advertising