Samsung SPA800BX-XAA - Manual (Page 31)

4) Green : Shows the picture in green by filtering out the red and blue color signals.
5) Blue : Shows the picture in blue by filtering out the red and green color signals.
Overscan Using this function, you can cut the edge of the picture when unnecessary information,
images or noise on the edge of the picture.
▶ Refer to "Size Support Mode" .
1) Off
2) On
1080P/24fps
Mode
This function displays the full 1080P@24Hz native HD signals which have 24 frames per
second with minimal scene distortions, as in a movie. Though the difference is small,
this function implements the highest screen quality.
▶ You can adjust 1080P/24 Frame mode in [HDMI 1] and [HDMI 2] modes only.
1) Off : Displays scenes where 24 frames are lengthened to 60 frames. Because of
this process, irregular scenes may be generated.
2) On : Displays scenes where 24 frames are lengthened to 48 frames. All scenes
are displayed regularly without any irregular scenes.
Film Mode Using this function, you can set the display mode optimized for playing movies when
watching a movie. Film Mode provides optimal display settings for movies.
▶ Film Mode is only supported for [Video], [S-Video] and [Component 1, 2](480i,576i).
1) Off
2) On
| Input | Picture | Setup | Option |
* Click the Play( )/Stop( ) button in the table below to view the video file.
Screen
Adjustment
Description Play/Stop
Install To support possible deficiencies in the installation location, you can invert the projected
images vertically/horizontally.
1) Front-Floor : Normal Image