Samsung LC24A650XS-ZA - Manual (Page 35)

35
Using "Central Station"
2
2 Using "Central Station"
between the product and a PC. The dongle connected to a PC should point at the product to maximize
signal reception.
Wireless communication can be affected by the surrounding environmental conditions. Do not place an
object, or obstacle, between the monitor and PC. The object can affect the sensitivity of the signal
transmission/reception.
z
Ensure the receiver (dongle) on the Central Station monitor is at the same level and facing the
transmitter (dongle) on the PC.
The table is a potential obstacle and can degrade wireless performance if the receiver (dongle) on
the Central Station monitor is not placed at the same level as the transmitter (dongle) on the PC.
This issue may occur even if the dongles face each other.
z
The sensitivity of the signal reception/transmission can affect the performance of video or game
playback (choppy or slowed-down video).
z
To maximize the transmission/reception, attach the transmitter (dongle) to the USB port (on either
side of the notebook PC) that is closest to the receiver (dongle) on the Central Station monitor.
z
To maximize the wireless communication performance, ensure your PC is within a range of 70cm
from the receiver (dongle) on the Central Station monitor. Ensure the PC and monitor are placed on
the same table or at the same height. Otherwise, the signal transmission/reception can be
degraded.
z
Using the Central Station monitor on a steel table will degrade wireless performance.
z
Do not place any object that can obstruct the signal transmission in front of the product. Such
objects may decrease signal reception.
z
This product cannot connect to multiple PCs wirelessly at the same time and vice versa.
Connecting to a PC via Wireless USB
1 Install "Samsung Central Station Setup" on the PC, and attach the dongle to the USB port on the
PC.
2 Press [ ] to change the input source for the product to Wireless.