Samsung LC24A650XS-ZA - Manual (Page 37)

37
Using "Central Station"
2
2 Using "Central Station"
5 Right-click on Connected Monitor to display the context menu as shown below.
z
Disconnect : Disconnect Wireless between the product and PC.
z
Set as default : Give first priority to the product to connect to the PC once a Wireless signal is
detected. A star will appear beside the monitor icon if the product is set as the default monitor.
z
Rename : Customize the name of the connected monitor.
The program will automatically activate to allow you to use the Wireless USB connection even
when the "Wireless Display" window is closed.
Automatic/manual Wireless USB connection
Set Auto Wireless Detection to On under HUB in the on-screen display menu. A Wireless USB
connection will automatically be established if the product is within 70cm from the PC. The first priority
will be given to a Wireless USB connection even when the product is in power-saving mode or is
connected to another input source ( Analog / HDMI / USB ). The Connecting to PC… message will be
displayed while connection is attempted.
To establish a Wireless USB connection when Auto Wireless Detection is set to Off , press [ ] to
switch to Wireless USB mode. The Connecting to PC… message will be displayed while connection is
attempted. Deactivating the Wireless USB mode will automatically restore the previous mode.