Samsung LT27B750NDX-ZA - Manual (Page 27)

Connecting to Audio Devices
Using an Optical (Digital) Cable and a Headphone Cable Connection
Use with Digital Audio Systems, Amplifiers, and Home Theaters.
OPTICAL
Headphone Cable
(Not Supplied)
Optical Cable
(Not Supplied)
✎ Headphones H: You can connect your headphones to the headphone output jack on your product. While the
headphones are connected, the sound from the built-in speakers will be disabled.
• The sound function may be restricted when you connect headphones to the product.
• Headphone volume and product volume are adjusted separately.
• The earphone jack supports only the 3 conductor tip-ring-sleeve (TRS) type.
✎ DIGITAL AUDIO OUT (OPTICAL)
• When you connect a Digital Audio System to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume
of both the product and the system.
• 5.1 CH (channel) audio is available when you connect the product to an external device supporting 5.1 CH.
• When the receiver (home theater) is set to on, you can hear sound output from the product’s optical jack. When
the product is receiving a DTV signal, the product will send 5.1 CH sound to the home theater receiver. When
the source is a digital component such as a DVD player / Blu-ray player / cable box / STB (Set-Top-Box) satellite
receiver and you connected it to the product via HDMI, you will only hear 2 CH audio from the home theater
receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player /
cable box / STB satellite receiver directly to an amplifier or home theater.
English - 26 English - 27
Connections