Samsung LT27B750NDX-ZA - Manual (Page 61)

Connecting to the Network
Wired Network Connection
There are three main ways to connect your product to your network using cable, depending on your network setup.
They are illustrated below:
– You can attach your product to your LAN by connecting the LAN port on the back of your product to an external
modem using a LAN cable.
The Modem Port on the Wall External Modem
(ADSL / VDSL / Cable TV)
Modem Cable (Not Supplied) LAN Cable (Not Supplied)
Product Rear Panel
– You can attach your product to your LAN by connecting the LAN port on the back of your product to an IP Sharer
which is connected to an external modem. Use LAN cable for the connection.
The Modem Port on the Wall
External Modem
(ADSL / VDSL / Cable TV)
IP Router that has a
DHCP Server
Modem Cable
(Not Supplied) LAN Cable
(Not Supplied)
LAN Cable
(Not Supplied)
Product Rear Panel
– Depending on how your network is configured, you may be able to attach your product to your LAN by connecting
the LAN port on the back of your product directly to a network wall outlet using a LAN cable.Note that the wall outlet
is attached to a modem or router elsewhere in your house.
The Modem Port on the Wall
LAN Cable (Not Supplied)
Product Rear Panel
✎ Use Cat 5 or 6 (*STP Type) cable for the connection. (*Shielded Twist Pair)
✎ It is not supported when the network speed is below or equal to 10Mbps.
English - PB English - 61
Network Features Network Features