Samsung SCH-A990ZKAVZW - Manual (Page 165)

Section 9: Multimedia 165
Printing Pictures Using PictBridge
Section 9
To use PictBridge to print pictures from your phone :
1. Insert one end of the accessory cable into the USB slot
on the printer. (Printer must support PictBridge
technology.)
2. Press MENU, use the left navigation key to highlight
GET IT NOW. Press
Get PIX & FLIX.
3. Press My PIX. PictBridge Print.
4. Insert the USB cable into your phone.
5. Read the Connect Printer message and press the right
soft key Next.
6. Highlight the desired image and press the right soft key
Next. (To select multiple images, press to place
a check mark next to each image selected.)
7. Highlight Copies and press the navigation key left or
right to select the desired number of copies to print.
8. Press the navigation key down to select Type. Press the
navigation key left or right to select one of the following
sizes:
• 4x6
• Default
Note: These sizes may vary and are dependent on the printer’s capabilities.
9. Press the navigation key down to select Size. Press the
navigation key left or right to select one of the following:
• Standard : prints the standard image.
• Index : prints the index information.
Note: These options may vary and are dependent on the printer’s
capabilities.