Samsung SCH-A990ZKAVZW - Manual (Page 46)

46
Sect
ion 3
8. You’re asked to confirm the correct number as
VoiceSignal displays the results. Say “Yes” or “No” to
confirm or reject the number when prompted. You may
also say "Cancel" to exit VoiceSignal, or, "Repeat" to
restart VoiceSignal from the beginning.
9. The location is repeated through the earpiece and your
phone dials the number.
Tip: VoiceSignal voice-activates the entire contact list according to the
spelling of the entire name field of each contact entry. Remember to say
the entire name of the contact you want to dial, exactly as it is spelled in
the contact list.
If VoiceSignal has difficulty recognizing a particular name, try editing the
contact name to make it unique. Often times, adding a last name into the
name field of the contact entry will help. Avoid using abbreviations or
unusual spellings in the name field of any contact you wish to name dial.
Call Digit Dialing
Digit Dial allows you to dial any phone number by simply
speaking the digits into the phone. No training is
necessary, and Digit Dial is programmed to understand
natural speech.
1. In standby mode, press the key.
2. After a brief pause, a list of optional commands appears
in the display and the audio prompt “Please say a
command” plays through the earpiece or
speakerphone—if it is enabled.
3. As a single command, say “Call” followed by a valid 10-
digit phone number, such as “Call 6-1-7-5-4-3-2-1-0-
1,” at a distance of 3-12 inches from the phone in a
natural voice. For best results, speak the sequence of