Samsung HCR4245WX-XAA - Manual (Page 6)

English-6
Connecting a Camcorder
1
Locate the A/V output jacks on the
camcorder. They are usually found on
the side or rear of the camcorder.
2 Connect a set of audio cables between
the “AV 3 (L, R)” jacks on the TV and
the AUDIO OUT jacks on the
camcorder.
If you have mono camcorder, connect
L(mono) to camcorder audio out using
only one audio cable.
The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to
view the camcorder tapes without using a VCR.
TV Side Panel
or
Camcorder
1
2
3 S-Video Cable
Video Cable
Audio Cable
Connecting a Digital TV Set-Top Box
1
Connect a set of audio cables between
the “DVI IN (AUDIO) (L, R)” jacks on the
TV and the AUDIO OUT jacks on the
Set-Top Box.
2
Connect a video cable between the “DVI
IN (VIDEO)” jack on the TV and the
VIDEO OUT jack on the Set-Top Box.
Connecting to DVI (Digital Visual Interface)
By inputting a high-bandwidth Digital Content Protection high-definition picture source to the DVI
INPUT jack on the TV, high-definition pictures can be displayed on the screen in their digital form.
TV Rear Panel
DTV Set-Top Box
1 2
DVI Cable
Audio Cable
From Cable or
From Antenna
• The DVI INPUT jack is not
compatible with the picture signal
of a personal computer.
• Use a DVI 25-pin cable
(commercially available) in order to
digitally connect the TV with a
DTV decoder.
BP68-00383B_Quick Guide 2005/01/28 10:21 AM Page 6