Samsung HLT7288WX-XAA - Manual (Page 17)

English - 17
Plug & Play Feature
The first time you turn on your new TV, choose your basic settings for language, input source and channels, and
time of day using the plug and play feature. The TV will store these settings in memory. Storing the channels in
memory will allow you to scan the stored channels rather than have to enter their digits each time you want to
change channels.
When the TV is initially powered on, basic settings proceed automatically:
1 Press the POWER button on the remote control.
The message Executes the Plug & Play function when you set the TV at first or
reset it. Sets channels, clock and other functions. is automatically displayed.
2 Press the ENTER button to enter the language.
Press the ▲ or ▼ button to select language, then press the ENTER button.
The message Select Home Mode when installing this TV at home. is automatically
displayed.
3 Press the ◄ or ► button to select Shop or Home, then press the ENTER button.
➢ The default selection is Home.
➢ We recommend setting the TV to Home mode for the best picture in your home
environment.
➢ Shop mode is only intended for use in retail environments.
➢ If the unit is accidentally set to Shop mode, and you want to return to Dynamic
(Home) mode, press the Volume button and then hold down the MENU button for
five seconds on the TV panel.
4 Press the ▲ or ▼ button to memorize the channels of the selected connection, then
press the ENTER button.
➢ If the antenna is connected to ANT 1 IN (CABLE), select Cable and if it is
connected to ANT 2 IN (AIR), select Air.
➢ If both ANT 1 IN (CABLE) and ANT 2 IN (AIR) are connected, select the Air +
Cable.
➢ In Cable mode, you can select the correct analog signal source among STD, HRC,
and IRC by pressing the ◄ or ► button, then press the ENTER button. If you have
Digital cable, select the signal source for both Analog and Digital.
Contact your local cable company to identify the type of cable system that exists in
your particular area.
5 The TV will begin memorizing all of the available channels.
After all the available channels are stored, the Auto program menu reappears.
Press the ENTER button when channel memorization is complete.
The Clock Mode menu is displayed.
➢ To stop the search before it has finished, press the ENTER button with stop
selected.
Continued...
Plug & Play
Executes the Plug & Play function when you set the TV
at first or reset it. Sets channels, clock and other
functions.
Exit Enter
OK
Plug & Play
Select Language of the OSD.
Menu Language : English
English
Español
Français
Skip Enter
Plug & Play
Select Home Mode when installing this TV at home.
Home Shop
Skip Enter
Skip Enter
Plug & Play
Select the antennas to memorize
Air
Cable
Air+Cable
Start
Start
Start
Plug & Play
Selects the cable system.
Analog
Digital
STD HRC IRC
HRC IRC
Skip Enter
Plug & Play
Auto Program in Progress.
Stop
Cable 10
3%
Skip Enter
STD
Move
Move
Move
Move
Digital Channels are added on the favorite
channel list.
Plug & Play
Auto Program is completed.
3 channels are memorized.
Air : 1 Cable : 2
OK
Skip Enter
Plug & Play
Would you like to stop the auto channel
selection ? Cable 10
3%
Digital Channels are added on the favorite
channel list.
Enter
No Yes
Move Skip
BP68-00640A-00Eng.indb 17 2007-04-23 ¿АИД 4:16:28