Samsung HLT7288WX-XAA - Manual (Page 61)

English - 61
Adjusting the Melody Sound
The TV power on/off melody sound can be adjusted.
1 Press the MENU button.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
Press the ▲ or ▼ button to select Melody, then press the ENTER button.
2 Press the ▲ or ▼ button to select Off, Low, Medium, or High, then press the ENTER
button.
Press the
EXIT button to exit.
Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
TRADEMARK & LABEL LICENSE NOTICE
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the “Blue Screen” mode to “Off”.
1 Press the MENU button.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
Press the ▲ or ▼ button to select Blue Screen, then press the ENTER button.
2 Press the ▲ or ▼ button to select Off or On, then press the ENTER button.
Press the EXIT button to exit.
➢ Blue Screen is displayed when there is no signal from an external device,
regardless of the Blue Screen Setting.
Light Effect : Always
Blue Screen : Off
Melody : Medium ▶
Bluetooth
Anynet+ (HDMI-CEC)
SW Upgrade
Function Help
: On
Setup
Off
Low
Medium
High
Setup
Light Effect : Always
Blue Screen : Off
Melody : Medium ▶
Bluetooth
Anynet+ (HDMI-CEC)
SW Upgrade
Function Help
: On
Setup
Film Mode : Off
Light Effect : Always
Blue Screen : Off ▶
Melody : Medium
Bluetooth
Anynet+ (HDMI-CEC)
SW Upgrade
Function Help
: On
Film Mode : Off
Light Effect : Always
Blue Screen : Off ▶
Melody : Medium
Bluetooth
Anynet+ (HDMI-CEC)
SW Upgrade
Function Help
: On
Setup
Off
On
BP68-00640A-00Eng.indb 61 2007-04-23 ¿АИД 4:17:26