Samsung EC-NV15ZBBA-US - Manual (Page 4)

《3》
Caution Contents
CAUTION indicates a potentially hazardous situation which, if not avoided,
may result in a minor or moderate injury.
● Leaking, overheating, or damaged battery could result in fire or injury.
- Use battery with the correct specification for the camera.
- Do not short circuit, heat or dispose of battery in fire.
- Do not insert the battery with the polarities reversed.
● Remove the battery when not planning to use the camera for a long period of
time. Otherwise the battery may leak corrosive electrolyte and permanently
damage the camera’s components.
● Do not fire the flash while it is in contact with hands or objects. Do not touch the
flash after using it continuously. It may cause burns.
● Do not move the camera while it is switched on when you are using the AC
Charger. After use, always switch off the camera before unplugging the cable
from the wall socket. Then make sure that any connector cords or cables to other
devices are disconnected before moving the camera. Failure to do so may
damage the cords or cables and cause a fire or electric shock.
● Take care not to touch the lens or lens cover to avoid taking an unclear image
and possibly causing camera malfunction.
● Avoid obstructing the lens or the flash when you capture an image.
● Before inserting any cables or AC adapter, check the directions and do not insert
by force. It may cause breakage of cable or camera.
● Credit cards may be demagnetized if left near a camera case. Avoid leaving
magnetic strip cards near the case.
007 System chart
008 Identification of features
008 Front & Top
009 Back
010 Bottom
011 Mode dial
013 Connecting to a Power Source
016 Inserting the Battery
016 Inserting the memory card
017 Instructions on using the memory card
019 When Using the Camera for the First Time :
Smart button
020 When Using the Camera for the First Time :
Setting up the Date / Time and Language
021 LCD monitor indicator
022 Starting the recording mode
022 How to use the AUTO mode
022 How to use the PROGRAM mode
023 How to use the MANUAL mode
023 How to use the ASR (Advanced Shake
Reduction) mode
024 How to use the EFFECT mode
READY
RECORDING