Samsung MX-E650CB-ZA - Manual (Page 14)

14
English English
14
English
15
You can store up to:
15 FM stations.
1. Select FM by pressing the TUNER/AUX button on
the main unit.
You can also select
FM by pressing the FUNCTION
button on the remote control.
2.
To sear ch for
a station
Press TUNING MODE button
Preset One or more times until FM XX is
displayed. You can search the stored
frequencies in the Preset mode.
Manually One or more times until MANUA is
displayed. You can search the frequen-
cies one by one in the Manual mode.
3. Select th e station to be stored by:
• Pressing t he TUNING/ALBUM , or . button on the
remote control button to select the preset station.
• P ress and hold the TUNING/ALBUM , or . button
on the remote control to automatically search for active
broadcasting stations.
4. Press the MO/ST button to switch between stereo and
mono.
• In a poor re ception area, select MONO for a
clear, interference-free broadcast.
• This applies only when listening to an FM station.
5. If you do not want to store the radio station found,
return to Step 3 and search for another station.
Otherwise:
a. Press the ENTER button.
b. Or, press the TUNING/ALBUM button on the
remote control to select a program number.
c. Press the ENTER button to save the preset.
6. To store additional radio frequencies, repeat Steps 3
through 5.
➣
In Tuner mode
• In the Manual mode, you can use [ or ] button
on the main unit to manually search for a radio station.
• In the Preset mode, you can use the [ or ] button
on the main unit to search for a stored radio station.
You can listen to a stored radio station.
1. Select FM by pressing the TUNER/AUX button on the
main unit.
You can also select FM by pressing the FUNCTION
button on the remote control.
2. Press the TUNING MODE button on the remote
control until “ FM XX ” is displayed.
3. Press the [,] button on the main unit or the
TUNING/ALBUM , , . on the remote control to
select a desired preset number.
Selecting a Stored Station
Recording Function Listening to Radio
You can record from a CD, radio broadcast, or an
external source to a USB storage device.
1. Connect an external USB storage device to the
USB (
) jack on your product.
2. Play a disc, tune to a station, or connect an
external source to your product.
CD
• Press the MP3/CD on the main unit to select the CD
function.
• Press the OPEN/CLOSE button to open the disc tray.
• Insert a CD and press the OPEN/CLOSE button to
close the disc tray.
• Use t he CD selection ( [ or ] ) buttons to select the
desired song.
Tuner
• Select TUNER by pressing the TUNER/AUX button
on the main unit.
• Tune to a station you want to record.
External Source
• Conn ect an External Component/MP3 player to your
product.
• Press the TUNER/AUX button to select <AUX> input.
• Pla y a song from the external device.
3. Press the USB REC button to start recording.
CD
• “TRACK RECORDING” is displayed and CD
recording starts.
• Press and hold the USB REC button to start recording
all tracks on the disc. "FULL CD RECORDING" is
displayed.
• If you record from an MP3 Disc, all the files are copied
onto the USB device.
“CHECK FILE”“COPY XX”“COPY END” is dis-
played. When the recording is done, “STOP” will be
displayed.
• If there is a duplicate file name, "FILE EXIST" is
displayed, and the function is canceled.
Tuner /External Source
• RECORDING is displayed .
4. To stop recording, press the STOP (@) button. The
unit automatically creates and saves recorded files
in .MP3 format.
5. To remove the USB device safely, press the STOP (@)
button once again. After recording, a directory named
“RECORDING”(CD), “CD COPY”(MP3 CD), “TUNER
RECORDING” or “AUX RECORDING”
is created in
your USB device.
MX-E630CB-E650CB-ENG-XAA-0710.indd 14 2012-7-10 10:49:19