Algolith Dual SD/HD Video Delay VLD-1002-MD - Manual (Page 15)

VLD-1002-MD Guide to installation and operation
15
The Card Setup Window
The Card Setup window allows the configuration of parameters affecting
the overall functionality of the card.
Save Settings Destination
The Save Settings Destination function allows the user to save up to
4 configurations of the VLD-1002-MD card’s parameters per channel.
Once you have configured the card to your liking in the Video Setup and
Audio Setup tabs of the Dashboard interface, select a name under which
the configuration will be saved, beside the Save Settings Destination
function, and hit the Save button. Parameters can be saved as:
• All (applies the settings to User 1, 2, 3 and 4)
• User 1
• User 2
• User 3
• User 4
Settings can be saved by channel (1 or 2), or for both channels together
(All) in the Save Settings Source section.
Channel Settings
Once the parameters are saved to memory, the configuration becomes
available as a preset in the Channel 1 Settings or Channel 2 Settings
drop down menus.
Factory settings can be restored by selecting Default in the Channel 1
Settings or Channel 2 Settings drop down menus. The preset applies
to the selected channel only. The preset is applied immediately.
Following boot up of the card, the settings are automatically restored
from the channel selected settings.
Save settings
Recall & apply settings