Algolith Dual SD/HD Video Delay VLD-1002-MD - Manual (Page 7)

VLD-1002-MD Guide to installation and operation
7
Installation and setup
The VLD-1002-MD card is installed in the openGear frame.
openGear frame
The VLD-1002-MD card requires a BNC rear output module. Depending on the
frame model you purchased, your frame may be equipped with a fixed 100
BNC rear panel.
openGear frame with a fixed 100 BNC rear panel
Your frame model may have a modular rear panel, to accommodate different
types of cards. You will then need to purchase and install a 10 BNC single rear
module for each VLD-1002-MD card in your openGear frame.
openGear frame with a modular rear panel
For information on the openGear frame and how to install your VLD-1002-
MD card and your rear modules, see the DFR-8310-C Multi Definition Digital
Products Frame and Power Supply (PS-8300) User Manual, provided with your
installation CD.