Samsung DVD-P701-XAA - Manual (Page 28)

Using the Zoom & 3D Sound Functions
Using the Zoom Function (DVD/VCD)
1 1 During play or pause mode, press the
ZOOM button on the remote. A square will
be displayed on screen.
2 2
Use the UP/DOWN or LEFT/RIGHT
button to select the part of the screen you
want to zoom in on.
3 3
Press the ENTER button.
- During DVD play, press ENTER to zoom in
2X/4X/2X/Normal in order.
- During VCD play, press ENTER to zoom in
2X/normal in order.
Using the 3D Sound Function
The simulated surround effect (SPATIALIZER N-2-2)
depends on the disc contents. If you connect the
unit to your stereo system, you can enhance sound
quality and produce a greater surround effect.
This feature is useful when you are using the DVD
player with a two channel stereo through the
analog outputs.
(Discs which are recorded with LPCM or DTS will
not work. When the DIGITAL OUTPUT is set to BIT
STREAM in the SETUP MENU, the 3D Sound
function will not work.)
1 1
During play, press the 3D SOUND button.
The 3D SOUND mark will be displayed on
screen. (Be sure the Digital Output is set to
PCM.)
2 2 Press the UP/DOWN buttons to turn the 3D
Sound feature on or off.
NOTE
• 3D Sound is possible only on discs
recorded using Dolby Surround or
Dolby Digital. However, some of these
discs do not contain rear channel
sound signals.
• Depending on the disc, the Zoom and
3D Sound function may not work.
28