Setting up the audio options – Samsung DVD-P701-XAA User Manual
Page 33
33
Setting Up the Audio Options
1
1
With the unit in Stop mode, press the SETUP button.
2
2
Use the UP/DOWN buttons to select AUDIO OPTIONS.
Then press the ENTER button.
3
3
Use the UP/DOWN buttons to select the desired item.
Then press the LEFT/RIGHT button.
Digital Output
1
. PCM : Converts to PCM(2CH) 48kHz audio.
Select PCM when using the Analog
Audio Outputs.
2
. Bitstream : Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital
Audio Output.
N
N
N
N
O
O
O
O
TT
TT
EE
EE
: Be sure to select the correct Digital Output or
no audio will be heard.
DTS
1
. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
2
. Off : Doesn’t output digital signal.
Dynamic Compression
1
. On : To select dynamic compression.
2
. Off : To select the standard range.
2X Scan Audio
1
. On : Turns 2X audio on.
2
. Off : Turns 2X audio off.
Though 2X Scan Audio is ON in the SETUP MENU,
no sound will be heard on discs which are recorded with
LPCM, DTS or MPEG-2 Audio.
NOTE
• How to make the SETUP MENU disappear or return to menu screen during set up; Press RETURN button.
• Certain audio features of this product manufactured under a license from Desper Products, Inc.
Spatializer
®
and circle-in-square device are trademarks owned by Desper Products, Inc.
• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of
Dolby Laboratories. Confidential unpublished works. ©1992-1997 Dolby Laboratories Inc. All rights
reserved.
• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
CHANGING
SETUP MENU