Samsung HT-BD2T-XAA - Manual (Page 22)

1
ENG
●
CONNECTIONS
Connecting The Speakers
Press down the terminal tab on the back of the speaker.
Insert the black wire into the black terminal (–) and the red wire into
the red (+) terminal, and then release the tab.
Connect the connecting plugs to the back of the Blu-ray Home
Theater by matching the colors of the speaker plugs to the speaker
jacks.
Use the Audio cable to connect the SUBWOOFER OUT jack of
the main unit to the AUDIO IN jack of the subwoofer.
1.
.
3.
.
Black Red
If you place a speaker near your TV set, screen color may be distorted because of the
magnetic fi eld generated by the speaker. If this occurs, place the speaker away from your
TV set.
M

FM
Front Speaker (R)
Center Speaker
Subwoofer Speaker
Front Speaker (L)
Surround-Back Speaker (L)
Surround-Back
Speaker (R) Surround Speaker (R)
Surround Speaker (L)
Do not let children play with or near the speakers. They could get hurt if a speaker falls.
When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is
correct.
Keep the subwoofer speaker out of reach of children so as to prevent children from
inserting their hands or alien substances into the duct (hole) of the subwoofer speaker.
Do not hang the subwoofer on the wall through the duct (hole). 



Audio cable
HT-BD2_XAA_1026.indd 21 2007-11-05 �� 3:10:57